Fully Automatic Blowing Machine
Price And Quantity
- Piece/Pieces
- 1
- Piece/Pieces
- 10000.00 - 100000.00 INR
Product Description
Features :
- Centralized Control Pneumatic System with Display output
- Automatic Discharge conveyor for Bottle transfer from blowing machine to filler which avoidmanual Intervention.
- Sturdy construction of machine along with frame structure. (6mm thickness 50mm X 50mm ms square pipe for frame structure)
- We are providing anti-vibrating cushioning pads for machine base.
- We are providing Heavy Tie Bars and Mould Plate. All indexing cylinders are guided with external guide 13) rod(s), so that breaking / bending of cylinder rod is not observed.
- Our machine has Proportional Hydraulic Clamping system to increase moulding Clamping / Opening speed with low vibration level.
- We are providing hydraulic locking system which avoid parting line at blown bottles.
- Specially design of loading and unloading arms for Pneumatic robots.
- Machine speed controlling at all operational stages of machine.
- We are providing non Contact Linear Potentiometer with Stretching, as blowing operations become position based, rather than Time Delay based.
- Provision of mould cage & cavity system.
- Accurate & defined preform pitch in oven for better heating efficiency.
- With dual neck protection for preform by using chilled water & air. No neck deformation.
- Neck holder of SS304
- Machine can handle thinnest necks too
- Graphical user interface using PLC OMRON.
- Heater Temperature Increment accuracy 0.1%
- Interactive User Interface showing Cycle Status and Error Messages. Log of error messages maintained.
- Chilled water supply & return lines equipped with insulated material to avoid falling of water droplets on mold base & body.
- Chilled water supply & return line for mold cooling of accurate design so that better cooling of blown bottles Machine with Servo motors for Stretching
- No preform No blow
- Sensor logic interlock with PLC at preform conveyor
- Indexing -pneumatic, loading -Pneumatic.
- Servo motors make( Panasonic/Omron)
- Machine with Operator & machine safety interlocks
- Enough size/volume preform storage at hopper with cover.
- Preform pusher at mandrel
- Yuken make hydraulic components
- Festo make pneumatic components
- With MCB/MPCB for heaters, motors
- Siemens make of SMPS.
- Sick make of limit & proximity switches
- Siemens make switchgears.
- With ELCB for incoming supply
- With overload protection
- With machine running hour meter & bottle counter
- Main panel with cooling system to control inside temperature
- With FRL fitted with gauges for preblowing & blowing air
- Centralized Lubrication for all moving parts.
Specification :
Machine Model | Blowing Cavities | Max Size (L) | Max Output (Hour) |
SSPI/2/1000 | 2 | 1000 | 2800-3000 |
SSPI/4/1000 | 4 | 1000 | 4600 |
SSPI/6/1000 | 6 | 1000 | 7200 |
Trade Information
- 1 Per Day
- 1 Week
Related Products
Contact Us
Shiv Shambhu Indl. Est, Bldg.no-5, Nr. Burmashell Petrol Pump, Nh-8, Village Waliv-Vasai (E), Vasai, Maharashtra, 401208, India
Phone :+918045475466